- Contact Person : Ms. Luo Lei
- Company Name : Beijing EFR Laser S&T Co., Ltd.
- Tel : 86-10-6436 1009
- Fax : 86-10-8457 2889
- Address : Beijing,Beijing,#6208, Building 6, Fanghezhengyuan Industrial Park, No. 16, Guanghua Road, Zhangjiawan Development Zone, Tongzhou District, Beijing
- Country/Region : China
- Zip : 101113
power supply for laser engraving and cutting
Related Product Searches:power supply for laser engraving and cutting,High Quality,power supply 130w 150w 180w, laser power supply,PS-N130w/150w
EFR laser power supply can be used for CO2 laser tubes 60w,80w,100w,130w,150w and 180w. Its input voltage can be AC220V or AC110V.
1. Excellent compatibility.
2. To lengthened the service life of the tube;
3. Power supply has a feedback port, which will be used for closed-loop control and operating current checking.
4. Power supply itself has a protection while in open-circuit state: Under the outer shell of the power is well connected with the ground, the power supply can be used in open-circuit state within a short time so as to avoid damaging the power supply when the laser tube leaks. Furthermore, the power supply's working lifespan will be prolonged.
Model | PS-N60/80 | PS-N100 | PS-N130/150 |
Input voltage | AC220V or AC110V(please attach a note when place the order) | ||
Exchange rate | 47 - 440Hz | ||
Cold surge current | ≤60A(AC220V input)/≤30A(AC110V input) | ||
Leakage current | ≤0.7mA(AC220V input)/≤0.4mA(AC220V input) | ||
Max output voltage | DC 35KV | DC 50KV | DC 50KV |
Max output current | DC 35mA | DC 35mA | DC 38mA |
Efficiency | ≤92% (full-load) | ||
MTBF | ≤10000 hours | ||
Response speed | ≤1ms(from Switching signal to the output current achieve to 90% of Pre-set current | ||
Control Port | TTL Level switch to control, Effective level, to choose high/low | ||
withstand voltage | input - output, input - shell; AC1500V 10mA 60s connect output cathode and shell | ||
Protection | Allowed to work under open-circuit condition shortly (the case touch the ground well, BAN the power arcing between the anode and the case) | ||
Usage environment | Work temperature: (-10 - 40)°C. Relative humidity:≤90% | ||
Cooling Type | Forced air cooling | ||
Size L×W×H(mm) | 250×139×107 | 285×139×107 | 352×139×107 |
Laser tube
power supply for laser engraving and cutting
